Roofing Terminology You Need to Know

Roofing Terminology You Need to Know

Roofing Terminology 101: This Is What You Need To Know

Whether it’s your first time owning a home or you’re just getting around to re-roofing your family home, it’s always helpful to know a little bit about roofing terminology.

Like any other industry, there’s plenty of jargon and unfamiliar words in the roofing world. Most of them make plenty of sense, but there might be some terms you need more context for to know what they mean. If you plan on chatting with roofers anytime soon, here are the definitions of some of the most common roofing terminology you’ll need to get by.

Roofing Terminology: 16 Helpful Terms To Know

Take a look at some of the most common roofing terms to prepare for your new roof installation.  

1. Asphalt 

Asphalt is the most commonly used roofing material in the US, closely seconded by metal roofs. If you’re looking at a home, it’s easy to determine if they have an asphalt roof — they’re the ones with shingles!

2. Laminate Shingles

Laminate shingles, also known as laminated architectural or architectural shingles, are a type of asphalt shingles. They’re built with a heavier base mat and multiple material layers of refined asphalt.

3. Downspout

A downspout is used to direct water away from your home’s foundation. Essentially, they’re large, metal pipes running from your gutters, down the side of your house, and away from the foundation. Aside from rain, these help redirect melted snow and ice water too. 

4. Eaves 

The eave is the lowest edge of your roof. Usually, this is the part of the roof that hangs over the side of your house. Eaves are made up of two parts: the soffit, the underside of your roof’s eaves, and the fascia, the vertical facing board.

5. Fascia 

Fascia is a finishing board that runs along the edge of a roof. It’s usually fixed to the trusses that support the roofing system and hides them to give a more “finished” look. Your fascia is also where the gutter is attached to the roof and can function as a protective barrier between the roof and gutters.

6. Drip Edge

Drip edge is metal flashing installed at the edges of the roof that helps control the flow of water away from the fascia. It also protects the underlying roofing components. Drip edges overhang on the sides of the roof and have a small metal flange bent away from the fascia.

7. Flashing 

When a roofer talks about “flashing,” they’re talking about the components used to seal tricky parts of the roof, like the space between your chimney and the rest of the roof or the areas around skylights. This is a key term to remember because roof flashing protects the most vulnerable parts of your roof from the elements and water damage. Old flashing is a common cause of roof leaks and can easily be fixed.

8. Step Flashing

Step flashing is a rectangular piece of flashing that’s bent 90 degrees in the center. It’s used for roof-to-wall flashing. With step flashing, multiple pieces of the flashing will be installed in layers with shingles to ensure that the water flows away from the wall.

9. Base Flashing

Base flashings are the portion of a flashing attached to or resting on the deck to direct water flow onto the roof covering. It consists of piles of roof membrane material used to seal a roof at the vertical plane intersections.

10. Joist 

Joists, rafters, and trusses are all the main components that make up the support of your roof. If you look in your attic, joists are the large wooden beams arching up diagonally, forming large triangles at the very top of your attic. Joists, trusses, and rafters hold up the exterior components of your roof.

roofing joists

11. Ridge 

On a roof, a ridge is any area where two faces of the roof come together. If you think of a roof as a triangle, the ridge is the very top point of the triangle, where the two sides of asphalt come together.

12. Sheathing (decking)

Sheathing (also known as roof decking) is the boards or sheets of thin wood that are nailed to the rafters of your roof. Sheathing goes on before the shingles and is the material that the shingles are secured to. Essentially, sheathing gives shingles structure so that the shingles can protect your home from the elements.

13. Square 

Square refers to the amount of roofing material needed to cover 100 square feet when properly applied. Check out this page on residential roofing for an in-depth look at how squares affect the price of roof replacement. 

14. Slope 

Slope, or pitch, refers to how steep your roof is. The steeper your roof, the quicker it will shed flowing water and snow, but the more difficult it will be for roof contractors to work on. An example of a steep slope would be a church steeple — it doesn’t get much steeper than that! A more shallow sloped roof would be something you might see on a classic ranch house.

roofing slope

15. Underlayment 

Underlayment is the second layer of protection for sheathing. For asphalt roofs, most underlayment is made of an asphalt-saturated felt — also called tar paper — and it blocks the elements from seeping into the sheathing.

16. Valley 

A roof valley is the exact opposite of a ridge. Where a ridge is a high point when two asphalt sides of the roof come together, the valley would be the low point where two asphalt sides come together. For example, if your garage connects to your home in an L shape, the place where the lowest point of your home’s roof meets the lowest point of the garage’s roof is the valley.

We’re Here For All Your Roofing Needs 

Now that you’re a pro with roofing terminology, it’s time to replace your roof. Looking for roofing help? Werner Roofing is here for you!

We’ve been in the business for years and love helping homeowners determine which type of roof is best for their home. Whether you’re looking for a small roof repair or you’re interested in a brand new roof, you can get your free roofing estimate today!

roofing contractor

OUR FREE ROOF INSPECTION

How do you know when it’s time for a new roof? The only way to be sure of your residential roof’s current condition is to have a licensed professional personally inspect it. Werner Roofing is proud to offer free roof inspections for every client, so you can be sure of your roof’s condition. Every Werner Roofing inspection comes complete with our promise: “We won’t recommend or sell a roof replacement unless it’s necessary.” 

New Roofing 101

New Roofing 101

If you’ve made a recent foray into home ownership, or if the home you’ve lived in for years finally needs a new roof, it might feel a bit overwhelming to start the new roofing process. A new roof is a big investment, and it’s something most people only do once or twice in their lifetimes — which means re-roofing is probably not something you’re used to or familiar with.

 

Even though a new roof can be a major expense, it’s an investment in the future of your home — keeping you and your family safe for at least another 20 years, and improving the resale value of your home. It’s a necessary improvement, but it doesn’t have to be stressful. If this is your first experience roofing or re-roofing a home, here’s everything you need to know:

Deciding on a New Roof

The hardest part of roofing is often just deciding when you need a new one. For some homeowners, a major leak or serious water damage makes it obvious that a new roof is in order, but barring a major incident like that, it can be tough to decide when getting a new roof is the right decision. Some signs that it’s time for a new roof include:

 

  • Leaks in your home or attic
  • Torn or curled shingles
  • A roof that’s older than 20 years
  • Sagging in the middle
  • Discoloration or excessive mold and algae growth

 

There are a few signs that make it obvious you need a new roof. If you’re experiencing any, or many, of the signs above, it’s probably a good idea to think about replacing your roof sooner rather than later. After all, your roof is one of the biggest things standing between your home and the elements.  

Choosing the Right Type of Roof

Once you’ve decided it’s time for a new roof, it’s natural to want to call up your local roofer right away. We encourage you to take a little bit of time to look around and really think about what type of roof you’re looking for this time around.

 

The two most popular materials for a new roof are metal and asphalt. We’ve laid out the pros and cons of asphalt vs. metal roofing in depth, but the reader’s’ digest version is this:

  • Metal roofing is lighter and more durable, lasting as long as 50 years. It’s also more costly upfront, but because it’s light can often be installed over an existing asphalt roof.
  • Asphalt roofing is more common and more affordable and will last about 20 years on average. It is heavier, which means that in most cases, you’ll need to pull off your existing asphalt roof before you can put on the new roof.

The material you choose will dictate the cost and the style of your new roof, so it’s an important step to determine early on in the new roofing process. Both asphalt and metal roofs offer myriad color options, you just need to decide which look you like the best. Head to Houzz or Pinterest for roofing design and style inspiration that can give you a better idea of what your new roof might look like.

 

New Roofing Cost Expectations

We’ve said it before, but a new roof can cost quite a bit of money. The cost of your roof will depend on a variety of factors, including what type of shingle or metal style roof you’d like, as well as the size of your home, the pitch of your roof, and if you have extras like a chimney or sunroofs that will take laborers a bit of extra time to work around.

 

In reality, a new roof can cost anywhere from $5,000 to $40,000 depending on the type of home you have, and the materials you choose, which is why it’s important to collect estimates from a few trusted local roofers in your area. Once you know what type of roof you’d like, and whether you need to tear off the old roof first, or simply overlay a new roof over the old one, you’re ready to talk to roofers.

Finding a Roofer

When it comes to hiring a roofer to install your new roof, the goal is to find the person who can provide the best quality, at the best price. You don’t want to hire the roofer with the lowest bid, simply because it will cost less, and you certainly don’t want to hire the roofer who quotes you at an astronomical price. You need a roof that will keep your family and your home safe and secure for at least another 20 years, which is why it’s so important to do your homework when you’re looking for a roofer.

 

Start by talking to your neighbors, friends, and family. Do they know anyone who’s recently had a new roof installed? Were they happy with the price and the quality of the labor? Asking around is a great way to determine who has a good reputation in your area, for the type of roof you’d like.

 

With a list compiled of local roofers you’re interested in talking to, you can call around and ask for estimates. Work to get itemized estimates if you can, as that will give you a better idea of where your money is going for your roofing job.

 

Don’t just stop at estimates either. Remember, you want a roofer who can provide an exceptional roof at a quality price, so you need to make sure the roofer you hire actually does good work. Talk to their references, and ask them questions about how they work and how long they expect your roof to take.

 

In the end, you’ll want to choose a roofer who you get along with, and who you trust to do a great job. Be thorough, and don’t hire anyone who doesn’t want to answer your questions or work with you as you decide who to hire. A new roof is a major investment, and you deserve a roofer who is willing to work with you throughout the entire process.

Schedule your New Roof Installation

Now that you’ve chosen a roof type, color, and style, and found a roofer you can trust, it’s time to schedule the installation of your new roof! Depending on the season, your roofer may have more or less availability. Most roofers are at their busiest during the summer, so if you’d like your new roof installed right away, plan to do your researching in the winter, and hire someone just as the weather starts to turn warmer.

 

If you do have to wait a while until your roofer has the availability to install your new roof, take that time to make arrangements for when the roofing crew does arrive. Roofing isn’t exactly a quiet job, so you might want to arrange to be out of the house for the period of time they’ll be working on the house. If you have pets or children, make sure they have somewhere to go while the roofing team is at work.

Enjoy Your New Roof!

With your new roof installed, you can relax knowing that your home is safe and secure for years to come. What’s more, you’ve likely improved your home’s energy efficiency and resale value. A new roof has quite a few benefits, not least being the improved curb appeal!

 

A new roof might seem like a daunting home improvement task. It is honestly one of the biggest fixes a homeowner has to make, but it doesn’t have to be a stressful experience. If you do your homework and find a roofer you trust, a new roof can be installed in a snap.

 

For new roof installation, you can trust in the West Michigan area, consider Werner Roofing. We’ve been installing both asphalt and standing seam metal roofs for decades, and we’ve won awards doing it. We’re here to help, and if you’re just not sure what your roof needs, we’re happy to give you a free, no obligation quote.

Is Your Chimney Safe For Santa?

Is Your Chimney Safe For Santa?

Michigan chimneys get a lot of use in the winter. With heavy snowfall, power outages, and chilly weather, the fire is the ideal place to warm up on a dark winter night. But perhaps one of the most important uses for your chimney this winter is Santa! Our jolly, gift-giving friend visits only once a year, and it’s important he can make it down your chimney safely. Not to mention a clean, healthy chimney will keep your home warm and safe as well.

Get your chimney swept

Dirty chimneys can cause a lot of issues. Buildup from previous fires and months of no use can cause blockages that trap carbon monoxide and other dangerous gases in your home. A chimney that hasn’t been swept in quite some time is also one of the leading factors of dangerous chimney fires. If you use your fireplace regularly in the winter, you should have your chimney swept at least once a year to keep your family safe, and Santa’s suit nice and clean.

Check flashing

If you’ve got a leak coming from your chimney, chances are it’s the flashing that’s to blame. Flashing is the material roofers use to seal any gap between shingles and the chimney, and over time it can become weathered and crack or shrink, which can cause major leaks. Not only do these leaks let water and snow in, they let heat out, which is why it’s important to get your flashing looked at as soon as possible if you suspect it might be leaking. It is good to know that flashing is easily repaired, so don’t worry about having to go through the hassle of getting it repaired. If you have your local roofing expert come out, it will probably only take a few hours before your chimney is fixed and leak free.

Consider a chimney cap

Chimney caps are a very smart idea for anyone who’s looking to avoid critters (other than Santa) creeping down the chimney. They go over the opening of your chimney and block animals and debris from falling into your home. Bats love the warm, dark hiding spots that a lot of chimneys offer, and a chimney cap will keep them from taking up residence. Don’t worry about a chimney cap deterring Santa, though. We’ve been informed that his magic allows him to slip through chimney caps easily.

Make sure Santa has plenty of room to land

Santa needs a nice clearing to land his reindeer and sleigh on your roof. Make sure you’ve got enough space around your roof that’s clear of branches and large trees, so he can set down comfortably. It’s also a best practice to keep trees and branches cleared away from your roof so they don’t crash down and break anything during winter storms and heavy snowfall.

Check chimney mortar

If you’ve got a brick chimney, it’s also a good idea to have the mortar holding the bricks together inspected every few years. The last thing you need is for your chimney to fall apart when Santa’s trying to squeeze down it. Chimney mortar does have a tendency to crack over time, and by inspecting it regularly, you can determine if your chimney will need maintenance and reinforcement before it becomes a structural problem.

 

Your chimney is actually fairly easy to take care of, so long as you’re remembering to inspect it at least once a year. Most chimney upkeep doesn’t take that long and will save you a ton of money in the long run by getting it done before problems arise. If your chimney flashing is leaking, or you haven’t had that part of your roof looked at in a while, be sure to give the experts at Werner Roofing a call. We’ll come out and make sure your roof is sealed up tight and is safe for Santa. Give our office a call at 616-844-5382 or contact us online for a free estimate.

Everything You Need to Know About Attic Ventilation

Everything You Need to Know About Attic Ventilation

Your attic: it’s a place you hardly go, where – if you can even get to it – you store all of the kids’ old clothes, your old textbooks, and that Nordictrack you never used. Most people find it’s best to avoid the attic at all costs because it’s a sort of unmagical Narnia that sucks things in, and never seems to let them go. But what most people don’t realize is that their attic is actually a very structurally important part of the home, which exists for more than just holding all of your unwanted, forgotten possessions. In fact, the state of your attic’s ventilation and insulation can mean the difference between you replacing your roof today or 10 years down the road. That’s right, it’s time to talk attic, and more specifically, attic ventilation. In this blog, we’ll tell you everything you need to know about attic ventilation, including what it is, what it does for your home, and how to tell if you have it or if you need it. Let’s start at square one:

What is attic ventilation?

Attic ventilation is a series of vents within your roofing system that increases airflow within your attic. Most new homes today automatically come with the proper number of vents to suit the size of the new home, and the size of the roof, but older homes may need vents added, or some may use attic fans as a temporary solution for a lack of ventilation.

Why do you need attic ventilation?

 

In Michigan, attic ventilation is the most important in the winter time. We talk about ice dams a lot in our blog, and that’s because they are such a major threat to your home. Proper attic ventilation is the number one way to prevent ice dams from even forming. If your attic is improperly ventilated, heat that’s trapped in your attic in the winter can cause snow gathering on your roof to melt. As the melted snow slides down the side of your roof, it refreezes when it gets to the outer edges, near your gutters, where there’s no heat under the roof. If the melting is allowed to continue, the ice patches on the edge of your roof will get bigger and bigger, building up on your gutters and sides of your roof, causing serious, irreparable water damage that can be expensive to replace.

 

We’ve got some suggestions to combat ice dams if they start to form, but the best way to avoid them is to ensure your attic is properly ventilated when you build your home or put in a new roof.

 

While proper attic ventilation is probably most noticeably necessary in the winter, it keeps your home safe in the summer as well. In the summer, heat absorbed by the roof can get trapped in your attic, and as Michigan is notoriously humid, all that hot, wet, air rises into the sub-roofing and rafters of your home. Without ventilation, all that humidity is trapped and can cause mold and rot that will eat away at the structure of your roof. With ventilation, that hot air has somewhere to escape, and your attic is kept mold and rot free.

Don’t get caught in a myth

Some people worry that by putting vents in their roofs, they’ll be letting conditioned air escape, decreasing their energy efficiency and costing them extra money. This couldn’t be further from the truth. Attic ventilation is the only way to keep your roof safe in both the winter and the summer, as it helps regulate the temperature within your attic. The only way attic ventilation systems would allow for conditioned air to escape out your roof is if your attic itself is poorly insulated. At this point, the ventilation is still not to blame, as it is the poor insulation that is allowing your cooled or heated air to escape in the first place. Know that roof vents are meant to regulate only the air and temperature within your attic, not the rest of your home.

The 1:300 Rule

As a general rule, your roof should have 1 square foot of ventilation for every 300 square feet of ceiling. Now, what type of ventilation you choose is up to you and your roofer, but know that there are a few different types of attic vents. Some have moving parts that force the air in your attic to circulate, and others do not, relying on the power of convection to push hot air up and out of the vents, and let cool air drop down. The type of vent you choose will depend on your home, the style of your roof, and how much heat your roof absorbs, so it’s best to talk to your roofer individually about what type of roof vents are best for you.

How do you know your attic is properly ventilated?

Well, if you begin to see ice dams forming on your roof, or if you see evidence of water damage, mold, or rot in your attic, chances are you have an issue. Before you assume it’s the ventilation, however, be sure to check your insulation. A poorly insulated attic floor can lead to a lot of the same issues, and it’s often easier to simply add a bit more insulation than it is to add extra attic vents. Additionally, if it’s insulation that’s the problem, and you add attic vents first, then you’ll essentially be wasting money as your heat or air conditioning literally goes through the roof.

 

So, if you’re having problems, first check your insulation. A home building professional or roofer should be able to tell you if the insulation below your attic is doing its job. If you need to add more insulation, it’s easy to do with simple rolls of fiberglass insulation. If insulation isn’t the issue, ask your roofer about ventilation.

 

When you have proper roof ventilation and attic insulation, you should have no problems with pesky problems like ice dams or roof rot. If you suspect an issue with your attic ventilation, give the experts at Werners a call. We’ll come out and inspect both your attic and your roof to make sure everything is ship shape for the coming winter. Call our office at 616-844-5382, or contact us online for a free estimate today!

7 Questions to Ask a Roofer When You’re Looking for an Estimate

7 Questions to Ask a Roofer When You’re Looking for an Estimate

A new roof is a big investment. It’s something you really only ever do once or maybe twice in a lifetime, so you want to make sure you get it done right. The hard part, though, is choosing the right roofer. Even if you have your materials and color all picked out, you still need to find a roofer who will give you an honest estimate and can deliver a quality roof sure to last at least the next few decades. So, if you’re in the process of finding the right roofer to give you an estimate or quote, here are a few questions to ask while you’re interviewing to help narrow your choices down to a few top-quality professionals:

#1 Who will be on the job?

Depending on the size of the company, it’s not always reasonable for a business owner to be at every single job site every day. That said, a reputable roofer will have a project manager or contact person in charge of each job site, that you can go to with any questions or concerns while they’re working on your new roof. This person will understand the ins and outs of your roofing project and will be available to answer any questions you may have. Quality roofers assign a point person to each job, so that clients are in the know, and don’t have to worry about playing phone tag while trying to figure out where their project is in the timeline.

#2 Do you offer a warranty?

Most manufacturer roofing materials come with a minimum warranty of about 25 years. While warranties will differ from company to company depending on the material you choose and the roofer you’re going with, you should at least get a 25-year warranty. Some roofers might offer an additional limited warranty on their labor, but don’t go with anyone who offers you less than a 25-year warranty on the materials.

#3 Do you have homeowner references?

Quality roofers tend to do a ton of projects every summer. Most good ones won’t mind if you check out one of their ongoing projects to see what the process looks like. If you’re considering a new roof in the off-season, or if the roofer you’re working with doesn’t have any ongoing projects, then they should give you a list of homeowner references—these will be people they did roofs for in the past, who you can talk to about the quality of their installation. Any roofer who refuses to offer references might not be your best choice. A quality roofer will be proud to show off their previous work, and shouldn’t hesitate to give you a few contact numbers.

#4 Will you remove the old roof?

It’s important to remember that in most cases, you’ll have to have your old roof removed before you can have the new one put on. While most roofers are pretty upfront about the cost of removing the old roof, there are roofers out there who will add on that fee at the end, unexpectedly increasing how much you have to pay. Make sure to ask if old roof removal is shown in the initial quote, and if it isn’t, ask to have them include it in your estimate before you commit.

#5 How do you protect the lawn and landscaping?

You work hard to make the area around your home look nice, and there’s a lot of mess and debris that comes in the roofing process. First, there’s the teardown process, which is the removal of all of the old shingles from your existing roof, and then there’s the installation of all the new shingles. With shingles, nails, and tools flying around all over the place, bushes, trees, and flowers can get damaged. Be sure to ask any potential roofers how they work to protect your landscaping while they’re on the job. It’s a good idea to let them know what you’re worried about being damaged in the first place, but a good roofer will already have your home in mind and will have a plan in place to keep your yard looking nice and tidy.  

#6 How long will the job take?

You want to have an idea of how long the job will take because, after all, they are roofing the house you live in. It’s not always fun to have workers up on the roof hammering away at 6 a.m., so you’ll want to prepare by asking how long the roofer expects your project to take. If you’re interviewing multiple roofers and notice that there are some installation time discrepancies, know that it’s likely a result of how many jobs each roofer has at one time. A company that has a ton of jobs might take a bit longer to complete your roof since their workers might be spread a bit thin, whereas a company with no other jobs will give you a super short estimate. If you can, pick someone in the middle, as they likely have other jobs, but not so many that your roof gets lost in the shuffle.

#7 Will you obtain the proper permits?

Finally, be sure to ask about the proper permits for your area. It’s good to know that there are roofers out there who will have you obtain permits yourself. While that’s not necessarily a bad thing, it’s a lot easier if the roofer just does it for you, because roofing permits require a lot of specific paperwork, and are different in just about every state. Most quality roofers who work regularly in your area will go ahead and take care of the permits for you, but it’s good to ask, just to make sure your roof goes up legally and soundly.

 

We hope these questions help you find a roofing professional you can trust to put up a roof that’s sure to last the lifetime of your house. If you have more questions about finding a roofer you can trust, or if you’re looking for a new roof in West Michigan, be sure to give Werner Roofing a call at 616-844-5382. We’ve been in the business for years now, and would be happy to answer any of your questions, or offer a free, no obligation estimate for your roof.